600 mm薄镜面主动光学望远镜轴系结构设计.pdfVIP

第44卷第4期 红外与激光工程 2015年4 月 Vol.44No.4 InfraredandLaserEngineering Apr.2015 600mm薄镜面主动光学望远镜轴系结构设计 王 槐，代 霜，吴小霞 (中国科学院长春光学精密机械与物理研究所，吉林 长春 130033) 摘 要院为研究大型望远镜薄镜面主动光学的核心技术，以600mm望远镜为缩比系统，采用高精度 标准轴承设计了具有快速装调、高互换性和便于维护等特点的俯仰-方位轴系结构。俯仰轴系由向心 角接触球轴承构成，方位轴系由推力球轴承和双列圆柱滚子轴承构成。采用有限元软件Patran仿真得 到了系统的前三阶固有频率和振型。分析了影响轴系回转精度的误差源，采用谐波理论对轴系误差测 量结果进行了处理，得到俯仰轴系晃动误差为4.2义，方位轴系晃动误差为9.3义。望远镜在外场观星试 验中得到了比较理想的成像效果，验证了轴系结构设计的合理性和正确性，并为中小型望远镜高精度 轴系的研制提供了设计依据和技术途径。 关键词院主动光学望远镜； 俯仰-方位轴系； 轴系晃动误差； 谐波理论 中图分类号院TH751 文献标志码院A 文章编号院1007-2276(2015)04-1260-07 Shafting structure design in a 600mm thin mirror active optics telescope Wang Huai, Dai Shuang, Wu Xiaoxia (Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China) Abstract: An alt鄄azimuth shafting structure with high precision standard bearings was designed for a 600mm scaled down model telescope system, which is for studying the large telescope thin mirror active optics technology. It has more benefits including quick installation and adjusting, high interchangeability, and easy maintenance. The altitude shafting is consisted of a pair of radial angular contact ball bearings. The azimuth shafting is consisted of thrust ball bearing and double鄄row cylinder roller bearing. The lowest three order natural frequencies and the modes were resolved by the finite element simulation software Patran. The error sources were analyzed, which are mainly affecting the shafting rotating accuracy. The measuring results were processed by harmonic theory and it shows good performance in the altitude shafting wobble error of 4.2义, a