监控摄像机说明书.docVIP

White light Car Plate Camera Mamual Model No: Note：Before using Camera power up, pls read Egnlish book carefully Outline This series cameras use Sony CCD image Sensor, combined with the newest DSP solution, built-in strong light polarization module, solve common license plate camera on the light inhibition of slow, poor inhibition, Japan Eclipse-based license plate frame machine and poor to make the picture show the natural color during the day, in night car headlight glare filter plate clearly show to achieve 24 hour residential entrances, car parks, toll station, petrol filling stations, car brand monitoring. Features: 1/3”Sony EX-view HAD CCD Adopt import white light, PWM line control, white light distance : 5-20M(optional) When illumination is less than 10lux, led (on) , 30lux, LED (off) Resolution: Color 600TVL, low illumination: 0.001lux LED (0lux led on) Super light suppression, more realistic color during the day; night filter to eliminate glare and halos, showing color screen Use 4-9mm manual varifocal auto iris lens, focus no shift in night, within 20meters you can see licence plate. Side of the flip-up cover design, manual focus adjustment, adjustable brightness white light, life of more than three years DC12V 2000mA. Installed indoor /outdoor, work voltage: DC12V, 2000mA. installation Testing In order to reach the best effect, pls operate as below ways : Basical step : A、Open the packaging, check if camera is good or not, accessories is complete or not , confirm the camera lens if it is close to the camera lens glass (Figure 1), if not, pls open camera case lock (Figure 2), the camera platform Unscrew the four screws (Figure 3), and promote the glass camera lens hole and remove the screws with a platform for re-fixed. Figure 1 Figure 2 Figure 3 The camera with the imperia