构建Graph图常用技术.docVIP

构建Graph图常用技术 作者：佚名 文章来源：不详 点击数： 7923 更新时间：2005-10-6 本篇文档主要讲述了Graph图构建过程中常用的技巧主要的内容如下： 1如何根据CLSID向graph中添加filter 2如何查找filter空闲的pin 3如何连接两个Filter 4如何获得filter或者pin的接口指针 5如何查找和某个filter的上下相连的filter 6如何删除graph中的所有filter 7如何利用Capture Graph Builder构建Graph图表 1如何根据CLSID向graph中添加filter下面的代码演示了如何利用CLSID生成一个filter，然后将其加入到graph图中 HRESULT AddFilterByCLSID( IGraphBuilder *pGraph, // Pointer to the Filter Graph Manager. const GUID clsid, // CLSID of the filter to create. LPCWSTR wszName, // A name for the filter. IBaseFilter **ppF) // Receives a pointer to the filter. { if (!pGraph || ! ppF) return E_POINTER; *ppF = 0; IBaseFilter *pF = 0; HRESULT hr = CoCreateInstance(clsid, 0, CLSCTX_INPROC_SERVER, IID_IBaseFilter, reinterpret_castvoid**(pF)); if (SUCCEEDED(hr)) { hr = pGraph-AddFilter(pF, wszName); if (SUCCEEDED(hr)) *ppF = pF; else pF-Release(); } return hr; } 在你的应用程序中，你可以这样用这个函数 IBaseFilter *pMux; hr = AddFilterByCLSID(pGraph, CLSID_AviDest, LAVI Mux, pMux);  if (SUCCEEDED(hr)) { /* ... */ pMux-Release(); } 注：有些filter是不能通过with CoCreateInstance方法创建的。例如AVI Compressor Filter和WDM Video Capture filter2如何查找filter空闲的pin看代码把 HRESULT GetUnconnectedPin( IBaseFilter *pFilter, // Pointer to the filter. PIN_DIRECTION PinDir, // Direction of the pin to find. IPin **ppPin) // Receives a pointer to the pin. { *ppPin = 0; IEnumPins *pEnum = 0; IPin *pPin = 0; HRESULT hr = pFilter-EnumPins(pEnum); if (FAILED(hr)) { return hr; } while (pEnum-Next(1, pPin, NULL) == S_OK) { PIN_DIRECTION ThisPinDir; pPin-QueryDirection(ThisPinDir); if (ThisPinDir == PinDir) { IPin *pTmp = 0; hr = pPin-ConnectedTo(pTmp); if (SUCCEEDED(hr)) // Already connected, not the pin we want. { pTmp-Release(); } else // Unconnected, 这就是我们想要的pin，空闲的pin { pEnum-Release(); *ppPin = pPin; return S_OK; } } pPin-Release(); } pEnum-Release(); // Did not find a matching pin. return E_FAIL