某空调水冷机组生产运作流程.pptVIP

Custom animation effects: snow scene (Difficult) Tip: For the effects on this slide, it is best to use a large, high-resolution picture. The picture in the example above is 2000 pixels wide by 750 pixels high. You will want to use drawing guides to reproduce the animation effects. To display and set the drawing guides, do the following: Right-click the slide background and select Grid and Guides. In the Grid and Guides dialog box, under Guide settings, select Display drawing guides on screen, and then click OK. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. As you drag the guides, the cursor will display the new position.) Press and hold CTRL, select the vertical guide, and then drag it right to the 5.00 position. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustration group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 7.5” and the Width box is set to 20”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Left. Click Align Middle. To reproduce the first snowflake effect on this slide, do the following: On the Insert tab, in the Illustrations group, click Clip Art. In the Clip Art pane, in the Search for box, enter j0299587.wmf. In the Search