环氧树脂加固空心板铰缝技术研究 .docVIP

南京林业大学 本科毕业设计（论文） 题 目： 学 院： 专 业： 土木工程（交通土建）学 号： 学生姓名： 指导教师： 职 称： 二O 年 月日简支板Abstract In the course of the construction of the bridge, widely adopted fabricated hinged panels, each beam structure between plate girders of cast-in-situ concrete by tongue-and-groove hinged connection. However, due to the design, construction, bridge the actual operation situation and other reasons, by different degree hinge joints of destruction, lost its due effect, shear transfer effect is poor, when the wheel in a root role all round plate beams by the heavy plate beams alone will bear that formed the adverse single slab condition, especially heavy truck traffic hinge joints when repeatedly, ripping up on both sides of the plate girders, add more accelerate repeatedly hinge joints aggravated the destruction. This paper of a simply-supported plate girder bridge in this paper.experimental the reinforcement, puts forward a new material: epoxy resin. According to the site of the damaged condition, this paper.experimental hinge joints for epoxy resin in this paper.experimental seam, improve filling the ability of the transfer shear. This paper puts forward epoxy resin reinforcement method of hinge joints hinge joints, epoxy resin reinforced materials with good fluidity and concrete shear strength strong cohesion, high speed, hardening may, according to their needs, will adjust its irrigation for people in this paper.experimental aperture damaged, the rapid spread, curing, restore the bond between both sides, and concrete bridge structure effectively restore integrity. Epoxy resin reinforced construction, can be in this paper.experimental does not destroy the original structure, dont interrupt traffic conditions, simple operation, and construction speed is quick. Key words: Hinged Slab or beam bridge Hinge joints Reinforcement Epoxy resin 目 录 目 录 III 1 绪论 1 1.1课题的提出背景与研究意义 1 1.2 空心板梁桥的特点 1 1.3 铰缝 2 1.3.1 铰缝自身作