副本RdQ BC new tins with ZIP CLOSURE.xls

Foglio1 SUPPLIER CONFIRMATION REMARKS PLEASE FILL IN: FOB PORT MOULD CHARGE MOULD TIME SAMPLING TIME LEAD TIME PCS/CTN CARTON WEIGHT OUR REQUIREMENT SUPPLIER STAMP AND SIGNATURE 1. cm 30*40*h 2. cm 40*40*h 3. cm 40*60*h 4. cm 80*40*h CARTON SIZE PLEASE CHOOSE DATE OF PB REQUEST ISSUED BY DATE OF SUPPLIER OFFER THIS QUOTATION IS BASED ON THE REQUIREMENTS OF PB LISTED HERE ABOVE max 15kgs ITEM MUST COMPLY TO ITEM MATERIAL DIMENSION THICKNESS ITEM WEIGHT COLOUR OF MATERIAL QUANTITY PACKAGING LEAFLET PRINTING one maxi leaflet for each carton (dim. 100x150 mm) TIME TO REACH THE PORT please advise 20,000 pcs 50,000 pcs 100,000 pcs 200,000 pcs FINISHING matt/glossy Tin plate (0,23 mm) OPEN pp bag + carton for each layer 20,000 tins 50,000 tins 100,000 tins 200,000 tins PRICE Tin box zip closure and carabiner box: silver or gold top: 4C cmyk + white mask bottom: 4C cmyk + white mask inside: 4C cmyk + white mask Tin plate (0,23 mm) + ZIP polyester with metal closure + metal carabiner please quote 3 options: a) 8,4 x 12 x 2,7 cm b) 8,4 x 14 x 2,7 cm c) 10 x 14 x 2,7 cm carabiner: tot.length 3 cm a) 8,4 x 12 x 2,7 cm b) 8,4 x 14 x 2,7 cm c) 10 x 14 x 2,7 cm confirmed 67g in theory $0.07 extra cost for adding printing inside our existing size : 110 * 80 * 37 mm, see right picture Existing size: 110*80*37mm Product Category Non-toys, for children over 3 years old Applicable Standards GPSD (The General Product Safety Directive 2001/95/EC) Total Cadmium (Requirements: Section 23 of Annex to Regulation 552/2009/EC requires each material, whether accessible or not, shall be less than 0.01% (100ppm) in concentration) Total Lead (Requirements: Accessible substrate 300ppm / Coating and Paints 90ppm) Phthalates + DIBP (Requirements: DEHP, DBP and BBP shall not be in any part of an article above 0,1% by mass. DINP, DIDP, DNOP and DIBP shall not be in any part of the toys which can be mouthed