多功能笔架盒塑料件注射模设计.doc

毕业设计说明书(论文) 作 者： xxx 学 号：08xxxxx014 学 院： xxxxxxxxxxxxxxxxx 专 业： 数控加工与模具设计 题 目： 多功能笔架盒塑料件注射模具设计 指导者： 评阅者： 2013 年 4 月 毕业设计说明书（论文）中文摘要 本文详细地阐述了多功能笔盒架注射模具的设计过程。设计了注射模具中的各个系统，如浇注系统、导向与定位机构、侧向分型与抽芯机构，并对塑料材料性能进行了分析，选择合适的注射机。根据塑件的产品数量要求，以及结构要求，该模具采用一模二腔。整个设计过程使用UG软件进行参数化设计，使整个模具设计过程简单明了。利用Mlodflow软件进行模流分析，为模具设计和成型工艺的确定提供参照依据。使用UG软件设计成型零件以及非标零件，从而进行全方面的参数化设计，即对模具进行分模、生成元件、装配、试模、开模、模架的选择等设计工作。同时应用UG软件可快捷地将三维图转化为二维工程图，直接指导生产。针对塑件的特点，本模具设计了侧抽芯滑块机构，也构成了本次模具设计的主要内容。 关键词 塑料模具 侧抽芯 注射模 注射机 模架 毕业设计说明书（论文）外文摘要 Title: Multifunctional pen rack box of injection mold design Abstract This paper expatiates a multi-function pen boxes frame injection mould design process. The design of injection mould includes pouring system, orientation and the position of the institutions, side parting and core-pulling mechanism. The plastic material properties are analyzed, and the injection machine is choosed appropriately. According to the number of plastic parts product requirements, and the structural requirements, the mould cavity with the two. The whole mould is designed by UG software, it makes the whole mold design process more simpler and clearer. Mlodflow software mold flow analysis can provides reference basis for the design and forming technology. Using UG software design molding parts and non-standard parts, and thus for all aspects of the parametric design, includes mold parting, and the formation of components, assembling, mode testing, mold opening, choice of formwork. At the same time using UG can easily transfer a 3d figure into a 2d engineering graphics, which can directly be used in producing. According to the characteristics of the plastic parts, the mould includes a side core-pulling slider mechanism, and this forms the main content of the design. Keyw