激光熔覆原位自生TiB_2Ni金属陶瓷复合涂层的裂纹研究.pdfVIP

下半月出版 Material＆HeatTreann咖≈材料热处理技术 激光熔覆原位自生TiB]Ni金属陶瓷复合 涂层的裂纹研究 汪新衡1，匡建新’．朱航生2 (1．湖南工学院机械工程系，湖南衡阳421002；2．衡阳丰顺车桥有限公司产品部，湖南衡阳421002) 摘要：用激光熔覆技术在45钢表面制备了不问成分配比的原位自生TiB2／Ni金属陶瓷复合涂层，研究了涂层的 残余应力分布和开裂行为。结果表明：裂纹源产生的部位主要是熔敷层中的硬质相夹杂物、熔覆层中共晶团间显微孑L和 熔覆层与基材界面间的微孔洞。 关键词：激光熔覆；原位自生；金属陶瓷涂层；残余应力；裂纹 中图分类号：TGl74．44；TB332 文献标识码：A 文章编号：1001．3814．(2010)02-0063—04 on Cermet CracksofIn—situ Study SynthesizedTiB2／Ni Composite Laser Coatingby Cladding WANG Jianxinl，ZHU Xinhen91，KUANGHangshen92 Mechanical Institute Division (1．Departmentof Engineering,Hunanof 421002，Chino；2．Productsof Technology,Hengyang Axle HengyangFengshunAutomobileCo．，Lid,Hengyan9421002，China) 45steel Abstract：In-situ cermet withdifferent werefabricatedon synthesizedTiB2／Ni compositecoatings compositions results laser residualstressandcracksindifferent werestudied showthat using cladding．The coatings bymicro·analysis．The thesitesofcrackssourceale inthehard inclusionsofthe micro-holesbetweeneutecties mainly phase，the claddinglayer,the inthe andthemicro·holesbetween andsubstrate． claddinglayer claddinglayer words：laser Key coating；residualstress；cracks cladding；in—situ；cermet 近年来结合原位反应技术兴起的激光熔覆自生 碍㈣。影响裂纹行为的因素较复杂，既有激光处理工 陶瓷涂层为激光熔覆陶瓷涂层注入了新的活力。原