- 10
- 0
- 约7.68千字
- 约 4页
- 2015-08-26 发布于安徽
- 举报
中国电机工程学会第十三届青年学术会议论文集
浅谈固体绝缘环网柜在智能电网中的应用与发展
崔海,李德泉,刘伟,马强,王思源
(济南供电公司 济南高新区新泺大街 1177#,250101)
On the solid insulation RMU application and development of the smart grid
Cui Hai Li Dequan Liu Wei Ma Qiang Wang Siyuan
(Jinan Jinan Development Zone, the new power company Lok Street, # 1177, 250101)
Abstract: After 2005, domestic enterprises have launched a
气体混合绝缘、SF6 气体全绝缘,直到现在以环
solid insulating RMU. The RMU canceled within the
氧树脂和真空绝缘为主的固体绝缘。 固体绝缘
insulation and pressure vessel applications interrupter
环网柜,是采用固体绝缘材料作为主绝缘介质的
switch body vacuum media, external insulation insulated
cylinder curing switch parts, connected by enclosed bus 环网柜,将真空灭弧室及其导电连接、隔离开关、
each loop. This structure due to cut off the air, water, gas, 接地开关、主母线等主导电回路单一或组合后用
dust and cold heat source, effectively slowing the corrosion 固体绝缘介质包覆封装为一个或几个具有一定
of power body. In terms of security, intelligence, flexibility, 功能,并可再次组合和扩展的具备全绝缘、全密
environmental protection, anti-poor environment than
封性能的模块,人可触及的表面涂覆有导电或半
traditional RMU has significantly improved, very suitable
导电屏蔽层并可直接可靠接地的环网柜。该类环
for the current strong smart grid construction in China is
vigorously promoting. 网柜产品作为智能配电网建设的重要组成部分,
满足“坚强、可靠、智能、绿色”的电力供应网
Keywords: solid insulation RMU smart grid security and 络的要求。
environmental protection 1、固体绝缘环网柜的特点
摘 要: 2005 年以后,国内企业陆续推出了固 固体绝缘环网柜的结构设计是从符合和适
体绝缘环网柜。该环网柜取消了压力容器的应 应现代坚强智能电网的要求出发,具备全绝缘、
用,开关本体的内绝缘与灭弧采用真空介质,外 全密封、模块化、小型化等主要特点。主回路部
原创力文档

文档评论(0)