全液压起重机行走液压系统设计_韩慧仙.pdfVIP

2010 3rd International Conference on Power Electronics and Intelligent Transportation System Design for Travel Hydraulic System of Full Hydraulic Crane 1 2 3 Huixian Han , Xianli Cao , and Maofu Liu 1) Department of Mechanical Engineering, Hunan Mechanical Electrical Polytechnic, Changsha, China (3776451@163.com) 2) Intelligent Engineering Research Institute, SANY heavy industry co, Ltd, Changsha, China (caoxianli@126.com) 3) Department of Mechanical Engineering, Hunan Mechanical Electrical Polytechnic, Changsha, China (Lmaof@163.com) Abstract—This paper described the advantages and application of a full hydraulic crane, analyzed the work conditions and requirements of crane hydraulic travel system, and determined the open hydraulic system solution of travel hydraulic system. Aiming to the work feature in four quadrants for engineering vehicles, it proposed the main function modules of open hydraulic travel system. It gave the design methods and components selection calculation process of travel hydraulic system, and analyzed and simulated the transient performance of start and brake condition. Finally, it obtains that the steady performance of crane hydraulic travel system is determined by hydraulic components and hydraulic parameters, and the transient performance of crane hydraulic travel system is determined by the latus rectum of relief valve according to simulations. Keywords—crane, hydraulic system, transient performance, design 全液压起重机行走液压系统设计 韩慧仙1 曹显利2 刘茂福3 1) 湖南机电职业技术学院机械系，长沙，湖南，中国 2) 三一重工股份有限公司智能研究院，长沙，湖南，中国 3) 湖南机电职业