_基于CAN的温度检测系统设计-检测电路硬件设计 电气自动化毕业论文.docVIP

南 京 理 工 大 学 毕业设计说明书(论文) 作 者: 张光鸿 学 号： 0810190246 学院(系): 自动化 专 业: 电气工程及其自动化 题 目: 基于CAN的温度检测系统设计 ----检测电路硬件设计 指导者： (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 年 月 毕业设计说明书（论文）中文摘要 CAN总线是一种多主方式的串行通讯协议，以其高比特率、高抗电磁干扰性、高实时性，在汽车工业、航空工业和工业控制等对数据实时性要求较高的领域中得到了广泛应用。本次设计采用Cygnal 公司的c8051f040单片机作为主控芯片，基于CAN总线设计、基于DS18B20温度传感器实现对环境温湿度的实时检测。设计过程主要由温度传感器DS18B20采集数据通过总线传输给单片机，单片机处理并显示。本设计测量温度的精度为±0.5℃，测量范围-50～80℃，系统反应时间小于1秒。总体来说，本设计的检测范围较广、稳定性和精度较高、设备简易、性价比高，很好的实现了对环境温的实时检测。 关键词 CAN总线 C8051F040 DS18B20传感器 TJA1050 毕业设计说明书（论文）外文摘要 Title The hardware circuit Based on CAN temperature detection system Abstract CAN Bus is a multimaster way of serial communication protoco, has high bit rate, high resistance to electromagnetic interference and supports realtime control with a very high level. Therefore, CAN bus have been widely used in the automobile industry, aviation industry and industrial control fields which require high level of realtime. This design uses Cygnals C8051F040microcontroller as the main control chip, based on the CAN bus design, based on the DS18B20 temperature sensor to realize the real-time environment temperature and humidity detection. The design process mainly consists of temperature sensor DS18B20data transfer through the bus to the microcontroller, SCM processing and display. The design of temperature measuring precision of plus or minus 0.5 DEG C, measuring range -50to 80 DEG C, system response time of less than 1 second.In general, the system has wider temperature and humidity measurements scope, higher stability and precision, simple equipment and higher performance-price ratio. It is very good to have realized the realtime detection for the environment. Keywords CAN bus C8051F040 DS18B20 TJA1050 目 录 1 引言 1.1 选题背景与依据 7 1.1.1 选题背景 7 1.1.2 发展及现状 7 1.1.3 选题意义 8 1.2 系统综述 9 1.2.1