巴西标准.docVIP

SUMMARY 1 Object 2 Application Field 3 Responsibility 4 Supplementary Documents 5 Initials and Abbreviations 6 Definitions 7 General Conditions 8 Specific Conditions 9 Certification Model 10 Use of Test Laboratory 11 Acknowledgement of the Certification Activities 12 Control of Certified Products 13 Obligations of the Licensed Company 14 Closing of the Manufacture and/or Import Enclosure A - Sampling and Tests in Plugs and Outlets Enclosure B - Plant Evaluation Enclosure C - Plant Evaluation Enclosure D - Identification of Certification within the SBC (Brazilian Certification System) 1 OBJECT This Standard provides additional criteria for the qualification of product certification offices - plugs and outlets, fix or mobile, exclusively for AC, with or without grounding contact, whether they are or are not part of connection and extension cables, with rated tension over 50V but not exceeding 440 V and rated current equal or below 32A, destined for domestic electrical installations or the like, internally or externally. 2 APPLICATION FIELD This Standard applies to all UOs of DINQP. 3 RESPONSIBILITY The responsibility for the review of this Standard falls to DINQP/DICEP. 4 SUPPLEMENTARY DOCUMENTS NIE-DINQP-047 Criteria for the Qualification of Product Certification Offices NIE-DINQP-067 Criteria for the Selection and Use of Tests Laboratories NBR 5426:1985 Sampling Plans and Procedures for the Inspection by Characteristics - Procedure NBR 6147:1998 Plugs and Outlets for Domestic and Similar Use - Specification NBR ISO 8402 Quality Management and Quality Assurance - Terminology NBR ISO 9002:1994 Quality Systems - Quality Assurance Template in Production, Installation and Associated Services NBR ISO/IEC Guide 2:1998 Standardization and Related Activities - General Vocabulary 5 INITIALS AND ABBREVIATIONS CNPJ National Register of Legal Entities DICEP General Product Coordination DINQP Standardization, Quality and Productivity Management INMETRO National Institute of Me