工业循环水中无磷缓蚀阻垢剂浓度的控制方法.pdf

广 东 化 工 2012 年 第12 期 · 70 · 第39 卷 总第236 期 工业循环水中无磷缓蚀阻垢剂浓度的控制方法 梁汉国，陈邦 (茂名众和国颂精细化工有限公司，广东 茂名 525011) [摘 要]报道了测定工业循环冷却水中无磷缓蚀阻垢剂浓度的一种新方法，根据无磷配方中含有的聚羧酸类聚合物能与季胺盐阳离子表面活 性剂在碱性条件下形成离子缔合物的特性，利用比浊法定量分析出循环水中无磷配方的聚羧酸类化合物的总含量。试验结果表明：聚羧酸类化 合物与 12/14 烷基二甲基苄基氯化铵形成的离子缔合物的浓度与吸光度之间存在良好的线性关系，而且分析结果不受钙离子、浓缩倍数、浊度、 杀菌剂等因素的影响，该方法可适用于工业循环水中无磷配方浓度的有效控制。 [关键词]工业循环水；无磷缓蚀剂；阻垢剂；控制方法；比浊法；浓度测定 [中图分类号]TQ [文献标识码]A [文章编号]1007-1865(2012)10-0070-03 Control Method of Non-phosphorus and Scale Inhibitor Concentration in the Industrial Circulating Water Liang Hanguo, Chen Bang (Maoming Sunion Guosong Fine Chemcal Co., Ltd., Maoming 525011, China) Abstract: Reported a new method for the determination of non-phosphorus corrosion and scale inhibition concentration in the industrial circulating cooling water. According to the characteristics of non-phosphorus containing polycarboxylic acid polymer with quaternary ammonium salt cationic surfactant can form ion-association complex under alkaline conditions. Quantitative analysis the total content of circulating water polycarboxylate non-phosphorus compounds by turbidimetry. The results showed that: A good linear relationship exists between concentration and absorbance of the polycarboxylic acid compound 12/14 alkyl dimethyl benzyl ammonium chloride ion-association complex formed. And the analysis of results are not affected from calcium ion concentration factor, turbidity, fungicides and other factors, The method is applied to the effective control of non-phosphorus concentration in in