外文翻译--国内典型压力机简介.doc

附录 英语原文 Local typical model pressure machine brief introduction The pressure machine of the our country produce manufacturing just at fast forward development.Now, local pressure model numerous, the species be well-found, underneath introduction use and structure function of the typical model product. J23 Series Open Back Inclinable Press Features: ????The inclinable frame made of cast iron make the work piece or scrap to slide down from the die. The press adopts a rolling key clutch and has two operation modes: single stroke and continuous stroke. The friction brake is used. Fixed with the slide, the overload protector will be damaged to protect the machine from overloading. This press has wide range of application, high precision, reliable performance and easy operation. The press can realize semi-automation production if fixed with the automatic feeder 。 Users can choose emergency stop equipment for the press above 25 tons. JE Series C Type High Performance Press With Fix Bed Purpose and structure performance: ◆ Square figure long guide with six friction faces makes abrasion resis ◆ Imported hydraulic overload protector has sensitive response and reli ◆ Wet clutch engages stably with low noise, which belongs to long-term ◆ Closed bevel gear, dipped in lube, which drives stably with low noise ◆ Slide with counter balancer, which will eliminate the clearance and ◆ Intermittent auto lubrication makes every point get fine and safe lu ◆ Infinite speed variation equipment is easy for die changing ◆ PLC electric control system is safe and reliable ◆ Air cushion, photo guard, auto feeder, speed die changing are optional. SH Series Super High Speed Press Purpose and structure performance With the designation of 3D CAD, finite element force analysis and mode analysis, SH series super high speed press has achieved the top in the world. This series presses are suitable for using in electrical connector, EI sheet, micro motor and other small accessories product