基于UG二次开发的谐波减速器的参数化设计.pdfVIP

36 04 UG 5 3 : 1004- 2539( 2012) 04- 0053- 05 UG 1, 2 1 ( 1 , 130033) ( 2 , 100039) 传统的谐波减速器的三维零件设计复杂, 利用UG 的二次开发可以提高UG 的设计效率, 缩 短产 的设计周期通过VC+ + 编写优化算法程序, 得到谐波齿轮减速器主要构件的三维参数数据 综合利用VC+ + 和UG 二次开发工具集, 编写接口函数, 实现谐波齿轮减速器的参数化设计, 分别建立 零件ACCESS 数据库进行综合管理并以减速器中最重要的构件柔轮的设计为例, 说明UG 二次开发的 流程 谐波减速器 UG 二次开发 参数化设计 MFC Application of UG Secondary Development Technology in the Harmonic Gear Reducer Parametric Design Xun Xiaoyun1, 2 Yan Chan xian 1 ( 1 Chan chun Institute of Optics,Fine Mechanics and Physics, Chinese Academy of Sciences, Chan chun 130033, China) ( 2 Graduate university of Academy of science, Beijin 100039, China) Abstract Traditional three- dimensional desi n of harmonic reducer components is complex. The secondary de- velopment usin UG can improve desi n efficiency and shorten product desi n cycles. The optimization pro ram written by VC + + is used to calculate the major component of three- dimensional parameter data of the harmonic ear re- ducer. VC+ + , UG secondary development tools and ACCESS database are utilized to write interface function and achieve the parametric desi n of harmonic ear reducer, Namely ACCESS database of harmonic ear reducer compo- nents are established to facilitate the inte rated mana ement. Usin the desi n of flexspline the most important part of the reducer as an example, the UG secondary development process is illustrate. Key words Harmonic ear reducer UG secondary development Parametri