助烧剂对NiCuZn铁氧体直流叠加特性的影响.pdf

助烧剂对NiCuZn铁氧体直流叠加特性的影响 董丽，颜铄清，冯则坤 (华中科技大学电子科学与技术系，湖北武汉430074) 摘要：采用固相反应法制备了NiCuZn铁氧体，研究了晶粒尺寸和添加玻璃对材料直流叠加性能的影响。 结果表明，单独添加Bi，0，时，在一定范围内，晶粒尺寸越大，材料的直流叠加特性越差。单独添加玻璃时， 助烧效果较差，烧结温度较高，晶粒之间浸润性也较差。复合添加玻璃和Bi203能较好的抑制晶粒的生长并且 获得了较好的直流叠加性能，材料的磁导率也能保持在一定范围内。 关键词：NiCuZn铁氧体；直流叠加特性；晶粒尺寸；添加 中图分类号：TM277 文献标识码：A 文章编号：1001-3830(2012)03．0045．04 the Effectof on DC sintering-aidagents superposition characteristicsofNiCuZnferrites DONG Ze-kun Li，YANShuo-qing，FENG Scienceand ofElectronic Technology,HuazhongUniversity Department and 430074，China ofScienceTechnology。Wuhan iaw method．Theeffectsof ferriteswere solid-state high material，NiCuZnpreparedby Abstract：Usingpurity sizeand additivesontheDCbias characteristicofNiCuZnfcrrilcsWCle the grain glass superposition investigated． was Was thattheDCbias characteristicdecreaseswith When observed Bi203dopedalone，itobviously superposition thatwhen was Callnotbe sizewithinacertain wasalsofound alone，the grain glass doped sintering increasing range．It andthe andthe was alittle infiltrationbetween high grains apparentlypromotedsintering