索穹顶结构整体提升张拉逆向模拟分析施工全过程研究.pdfVIP

40 10 2010 10 * 1 1 2 1 张丽梅 , 梁小勇, 陈务军, 杜守军 ( 1 , 050018; 2 , 200030) [ ] , , 2 , 5 , , , , , , [ ] ; ; Simulation analysis of whole inverse lifting and stretching process for integral cable dome structures 1 1 2 1 Zhang Limei , Liang Xiaoyong , Chen Wujun , Du houjun ( 1 Architecture and Civil Engineering, Hebei University of cience and Technology, hijiazhuang 050018, China; 2 pace tructures Research Center, hanghai Jiaotong University, hanghai 200030, China) Abstract:A simulation method of integral inverse lifting and stretching process for the cable dome was established based on nonlinear finite element method. The integral inverse lifting process of the cable dome was realized through changing the length of the positive constant force cables and the subsidiary cables. The cablestrutbeam model was used to simulate the cable dome, and the positive constant force cables and the subsidiary cables, the passive cables, the mast, the hub were respectively simulatedwith the twonode curved element, the fivenode isoparametric element, the strut element and the beam element. In the integral inverse lifting process, the integral cable dome moved from the final equilibrium state to the hub reaching ground, and the temperature action can simulate the variations of the cable length. All the structural members of the cable dome were assembled on the floor, and this can prevent structural assemblage in the air and spare construction time. At the same time, the changes of the structural topological relation can be avoided. Keywords: cable dome; inverse simulation analysis; integral lifting 0