回注水除铁的影响因素研究.pdfVIP

Hans Journal of Chemical Engineering and Technology 化学工程与技术, 2013, 3, 97-99 doi:10.12677/hjcet.2013.33018 Published Online May 2013 (/journal/hjcet.html) Research on Influential Factors of Iron Removal for * Reinjection Water 1,2 1,2 1,2 3 1,4 1,2 Wensen Zhao , Jian Zhang , Guorong Tan , Ming Duan , Jianchong Gao , Yingxian Cui 1State Key Laboratory of Offshore Oil Exploitation, Beijing 2CNOOC Research Institute, Beijing 3Southwest Petroleum University, Chengdu 4Tianjin Branch, CNOOC China Limited, Tianjin Email: zhaows@ th th th Received: Jan. 15 , 2013; revised: Feb. 18 , 2013; accepted: Feb. 27 , 2013 Copyright © 2013 Wensen Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract: In view of the Fe2+ in the reinjection water affected the content of suspend solid, the writer used the reactive material to oxidize and catalyze the Fe2+, and researched the influential factors of iron removal, such as reactive time, the thickness and the current velocity. The results showed that the reactive material removed the Fe2+ and was reduced to 0.1 mg/L from 10 mg/L when its reactive time was 6 days, the thickness was 0.8 m and the current velocity was 0.1 L/min, which was good for reducing the content of suspend solid. Ke