国内外非常活跃的研究课题材料利用率的最大化一直是人们追求的目标.docVIP

国内外非常活跃的研究课题材料利用率的最大化一直是人们追求的目标。这类矩形件的排料属典型的组合优化问题 具有很高的计算复杂性。所谓有限制二维板材优化下料 就是利用一定规格的板材 为指定尺寸 指定数量和指定纹理的零件下料 在满足配套的和切割便利前提下 使板材的利用率最高。在各行各业的下料中，涉及大量的二维优化下料问题，最优二维下料所涉及的知识面非常广泛，具体的方法种类繁多，应用也极为普遍。传统的下料工作都是人工依靠经验进行的，时间长并且效果不理想。由于生产实际的需要，人们迫切需要利用现代科技来解决这一问题。 本文在分析国内外下料问题研究现状基础上，引入 A 玩具企业关于布绒玩具布料二维裁剪的实例，要求使用布料皮数最少来实现公司的既定目标，实现其利润的最大值。 本文以 lingo 软件作为计算平台和工具库，计算具有实用价值的二维不规则零件优化下料系统。该系统具有良好的数据接口和友好的交互环境，用户可以方便地输入和调整参数该系统具有快速的响应特性，可以在比较短的时间内得到下料结果。关键词：优化，二维，下料 I 龙麒文：最优二维下料?ABSTRACT Optimized packing has been a very active research topic at home and abroad tomaximize material utilization has been one goal. Such materials are of rectangulartypical combinatorial optimization problems with high computational complexity.The so-called two-dimensional sheet optimization of restricted feeding is the use ofcertain specifications sheet the specified size specify the quantity and texture of theparts under the specified materials and cutting in the supporting facilities to meet theprerequisite to make sheet usage. Under the compound in all walks of life involvinga large number of two-dimensional optimization of cutting stock problem the optimaltwo-dimensional cutting stock a wide range of knowledge involved the specificmethod of a wide range of applications are very common. Under the traditionalmanual work is expected to rely on experience and a long time and are not ideal.Since the actual production needs people urgently need to use modern technology tosolve this problem. This paper analyzes the domestic and international issues of material under thepresent situation based on the introduction of A toy business on the two-dimensionalcutting fabric toys instance requires the least number of fabric skin to achieve thecompanys stated objectives to achieve their maximum profit. This paper lingo software computing platforms and tools as libraries computinghas the practical value of the two-dimensional irregular parts optimized blanks. Thesystem has a good data interface and friendly interact