0.037wt氢对铸态Ti45Al5Nb0.8Mo0.3Y合金高温变形行为的影响.pdfVIP

ACTA METALLURGICA SINICA 0.037wt.%氢对铸态Ti-45Al-5Nb-0.8Mo-0.3Y 合金高温变形 行为的影响 温道胜 宗影影 徐文臣 杨单媚 单德彬 （哈尔滨工业大学，哈尔滨150001） 摘 要 为了研究热氢处理技术对钛铝基金属间化合物Ti-45Al-5Nb-0.8Mo-0.3Y 合金高温变形行为的影响规律，本文利用Gleeble-1500D 对未置 氢和氢含量为0.037wt.%的铸态合金进行了等温热压缩试验，并利用SEM、TEM 观察了合金压缩后的微观组织．结果表明：氢可以降低合金的高温 -2 -1 变形流动应力，细化微观组织，提高合金的热加工性能．与未置氢合金相比，在 1200℃，应变速率1×10 s 变形条件下，氢可使合金的峰值流动应 力下降25%左右．置氢处理促进了位错运动，动态再结晶和孪生变形，并提高了β(B2) 相的含量，这是置氢合金高温变形流动应力下降的主要原因． 关键词 钛铝基金属间化合物，置氢，流动应力，位错运动，动态再结晶 中图法分类号 TG146.2 文献标识码 A 文章编号 0412— 1961(200×)×— ××—× EFFECTS OF 0.037wt.%H ON THE HIGH TEMPERATURE DEFORMATION BEHAVIORS OF A CAST Ti-45Al-5Nb-0.8Mo-0.3Y ALLOY WEN Daosheng, ZONY Yingying,XU Wenchen, YAN G Danmei, SHAN Debin Department of Materials Science and Engineering, Harbin Institute of Technology, Harbin 15000 1 Correspondent：Zong Yingying, associate professor, Tel:( 0451) E-mail: hagongda@hit.edu.cn Supported by National Natural Science Foundation of China(No. Manuscript received 200*— **— **，in revised form 200*— **— ** ABSTRACT In order to investigate the effects of thermo hydrogen treatment on high temperature deformation behaviors of TiAl-based intermetallic compound, Ti-45Al-5Nb-0.8Mo-0.3Y alloy. Isothermal hot compression tests of the cast alloy containing 0H and 0.037wt.%H were carried out by use of a hot simulator, Gleeble-1500D, and their microstructures were studied using SEM and TEM. The results show that hydrogen is able to decrease high temperature deformation flow stress and refine microstructure, which leads to an improvement of the hot workab