3.xls1000控制器部件.ppt

HONEYWELL 3-IDC8/4 Traditional Zone I/O Module 1. Provides 8 Class B IDCs for compatible 2-Wire Smokes or dry contact devices. 2. Each IDC may be set for latching/non-latching and verified/non-verified operation. 3. Each IDC supports 30 6270B(Photo) or 50 6250B(Ion) Conventional Smokes 4. 4 of the zones may be converted to supervised output circuits for NACs. 5. NAC circuits operate in pairs. (NAC 1/2, NAC 5/6) a. Maximum current for each pair is 3.5 Amps 6. Provides Internal/External Signal Source for NAC circuits 7. Accepts a Control/LED Display IDC/NAC #1 IDC/NAC #2 IDC #3 IDC #4 NAC IN 1/2 IDC/NAC #5 IDC/NAC #6 IDC #7 IDC #8 NAC IN 5/6 B401B BASE 6251B-001A BASE INITIATING DEVICE CIRCUIT (IDC) Connect to IDC 3, 4, 7 or 8 IDC/NAC 1, 2, 5 or 6 4.7K EOL NOTIFICATION APPLIANCE CIRCUIT (NAC) Connect to IDC/NAC 1, 2, 5 or 6 15K EOL See Manual for Jumper Settings 3-LDSM LED Display Support 1. The 3-LDSM is used for installing a Control/LED Display in an empty module space. 2. Local rail module which plugs into empty module space. 3. Control/LED Display is attached to front of 3-LDSM. (Back View) 3-OPS Off Premise Signaling Module 1. Local rail module 2. Provides off premise notification: a. Reverse polarity for alarm, supervisory and trouble signaling. b. Supervised local energy box trip c. Single alarm notification AUDIO COMPONENTS OF THE XLS1000 FIRE ALARM NETWORK 3-ASU Audio Source Unit 1. 3-ASU Consists of two parts: a. Controller Unit which mounts on the left most footprint on the back of chassis.. b. Cover assembly which houses microphones and control panel. 2. The 3-ASU comes installed in its own chassis unit in two ways: a. The 3-ASU/3-CHAS4 with the 3-ASU mounted with four module space rail assembly (as shown). b. The 3-ASUFT with the 3-ASU mounted with a 3-FTCU and Firefighters Phone Control Unit (Not shown). 3. Provides Master Paging, Tone generator, and digital messages. 4. Provides s