带式输送机功率计算方法及其工程应用问题的研究.pdfVIP

15 6 Vol. 15 No.6 2008 12 Journal of Engineering Design Dec. 2008 DOI: 10.3785/ j. issn. 1006-754X. 2008.06. 013 带式输送机功率计算方法及其工程应用问题的研究 宋伟刚,姜 涛 ( , 110004) :CEMA DIN22101,CEMA ,Visual Basic61 0 CEMA , . CEMA K y DIN22101f ,CEMA ; , , . DIN22101 ,CEMA . :; ;; :TD634.1 : A :1006-754X( 2008)06-0448-09 Research on power calculation method for belt conveyor and its problems in project application SONG We-i gang, JIANG Tao (School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China) Abstract: By comparing the CEMA method for power and tension calculations of belt conveyor with the DIN2201 method, the characteristics of the CEMA methodwas definitely analyzed. The power and tension calculation software for belt conveyor was developed according to the CEMA method developed by Visual Basic 610 and it was validated by case studies and engineering appli- cations. Through research on the relationship between curve resistance factor K y in the CEMA method and analog friction factorf in the German DIN2201 standard, the regularity of the main resistance in the CEMA methodwas obtained and the correction function of analog friction factor was provided; with the correcting skills of temperature correction factor; the power and the ten- sion could be calculated according to the input analog friction factor, which extended the func- tions of this software. Due to the fact that there was no correction methodrelative to temperature when adopting DIN22101 standard, the corre