Evaluation criteria of apparel product.docVIP

Evaluation criteria of apparel product Property Nike standard/assessment criteria Fabric Pilling ASTM pilling standard photographic 4.0 or better, excessive fuzzing, fibrillation and pile clumping is unacceptable Snagging Any noticeable picks or snags are unacceptable Pile Note any shedding bald spots or loss of coverage Skewness Not to exceed 5% for tops, 3% for bottom also perform visual assessment, skew over 2.5 cm Dimensional stability Note any differential shrinkage, puckering between lining,panel and /or component within a garment.see below for dimensional stability standards by material content of the majority of garment excessive and noticeable differential shringkage is not unacceptable Woven 100%cottonCVN 5X 5;CVS 3X3; 100%SYNTHETIC 3X3; Knit 100%cottonCVN 8X 8;CVS 5X5; 100%SYNTHETIC 5X5; low shrinkage fleece 5x5 Color staining Rate after 3complete wash and dry cycles using AATCC grey scale color change and color staining Color change: grade 4.0 Color staining:grade 4.5,no visible color bleeding within garment Wrinkling Comment if excessive wrinkling and ironing is necessary. May iron if allowed by care label instructions Hand Note any change in hand-feel Components trims embellishments Lining, fusing lamination Puckering, delamination, blistering, overall appearance Screen print, heat transfers Adherence, wash out, durability, cracking, peeling, overall appearance Patches, appliqués, embroideries Puckering, fraying, bleeding, overall appearance Seams, stitches, eyelets, buttonholes Grinning, broken, puckering, overall appearance Fasteners: Velcro,zippers,button Puckering, paint chipping, rough or sharp edges, proper installation or color loss. check use and function of fasteners/closure by operating 5 times Rib collars cuff overall appearance,distortion,pilling,fibrillation,creasing Tape piping Puckering, overall appearance Placket Puckering, overall appearance elastic Loss of elasticity tw