Impedance Analysis of Bunch Length Measurements at the ATF Damping Ring.pdfVIP

SLAC-PUB-8846 1 0 May 2001 0 2 y a M Impedance Analysis of Bunch Length 0 Measurements at the ATF Damping Ring∗ 3 ] h ‡ ‡ § ‡ p K.L.F. Bane, T. Naito , T. Okugi , Q. Qin , and J. Urakawa - c Stanford Linear Accelerator Center, Stanford University, c Stanford, CA 94309 USA. a . s c i s y h Abstract p [ We present energy spread and bunch length measurements at the Accelerator Test Facility (ATF) at KEK, as functions of current, for 1 v different ring rf voltages, and with the beam both on and off the 2 coupling resonance. We fit the on-coupling bunch shapes to those of 0 an impedance model consisting of a resistor and an inductor connected 1 5 in series. We find that the fits are reasonably good, but that the 0 resulting impedance is unexpectedly large. 1 0 / s c i s y h p Presented at the 10th International Symposium on Applied : v Electromagnetics and Mechanics (ISEM2001) i Toshi Center Hotel, Tokyo, Japan X r May 13-16, 2001 a ∗Work supported by Department of Energy contract DE–AC03–76SF00515, and by the Chinese National Foundation of Natural Sciences, contractA050501. ‡High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba, Ibaraki, Japan. §Institute of High Energy Physics (IHEP),