Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes英文资料.pdfVIP

Progress in Energy and Combustion Science 38 (2012) 87e112 Contents lists available at ScienceDirect Progress in Energy and Combustion Science journal homepage: www.el /locate/pecs Review Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes * Takeshi Kuramochi , Andrea Ramírez, Wim Turkenburg, André Faaij Group Science, Technology and Society, Copernicus Institute, Faculty of Science, Utrecht University, Budapestlaan 6, 3584CD Utrecht, The Netherlands a r t i c l e i n f o a b s t r a c t Article history: This article presents a consistent techno-economic assessment and comparison of CO2 capture tech- Received 22 November 2010 nologies for key industrial sectors (iron and steel, cement, petroleum refineries and petrochemicals). The Accepted 20 May 2011 assessment is based on an extensive literature review, covering studies from both industries and Available online 30 June 2011 academia. Key parameters, e.g., capacity factor (91e97%), energy prices (natural gas: 8 V2007/GJ, coal: 2.5 V2007/GJ, grid electricity: 55 V/MWh), interest rate (10%), economic plant lifetime (20 years), CO2 Keywords: compression pressure (110 bar), and grid electricity CO2 intensity (400 g/kWh), were standardized to CO2 capture enable a fair comparison of technolog