实验仿真结合法测定金属固液相变点导热系数.pdfVIP

http :// The Research on Combing Method of Experiment and Simulation to Determine Thermal Conductivity of Metals at the liquid/Solid Phase Transformation Point1 Ying Yang Jiemin Zhou School of Energy and Power Engineering School of Energy and Power Engineering Central South University Central South University Changsha, Hunan, PRC 4 10083 Changsha, Hunan, PRC 4 10083 yangying_csu@ Prof _zhou@ yangying_csu@126.com Abstract Based upon the theory that the thermal conductivity can be determined by measuring the speed of the propagation of the solid/liquid phase interface during phase transition a set of measuring system was developed to investigate the thermal conductivity of the metals and alloys at the liquid/solid phase transformation point. Meanwhile, the mathematic method was applied to intuitively simulate the melting and solidifying process in the phase transformation chamber, by which the error could be analyzed and partly corrected. In this way, the result precision was increased to some degree without complicating the measuring system. In order to test the feasibility of the method and the measuring system, a series of verification experiments had been performed to estimate the precision and the applicability of the measuring system Compared with the recommended data from Reference, the creditability of the experimental results is abo