ASME试卷.doc

ASME 规范产品Ⅲ级射线检验人员专业考试试题 SPECIFIC EXAMINATION QUESTIONS FOR LEVEL Ⅲ PERSONNEL OF RADIOGRAPHIC TESTING FOR THE ASME CODE PRODUCTS 姓名 得分 NAME_____________GRADE_____________ In the following selecting questions,choose the letter represents the right answer into the brackets; in the judging questions, fill ○ or × to indicate whether correct or not. 对下列选择题，选择代表正确答案的字母填入括号内；对判断题，在括号内填入○或×，以示其正确与否。 1.The function of soup is reducting the exposed AgBr grain into metal Ag.( ) 1.显影液的作用是把已曝光的AgBr颗粒还原成金属银。（ ） 2.New or stopping using or long time X-ray inxtrument should be “training”before operation ,its aim is improve vacuum of X-ray tube.( ) 2.新的或长期停用的X光机，使用前要进行“训练”，其目的是提高X光管的真空度。（ ） 3.In the course of exposure ,the lend intensifying screen closely contact with the X-ray film can improve the density of negative,its reason is ( ). the lead intensifying screen may emit fluorescence and visible light ,and accelerate sensitization of film. The lead screen may absorb scattering ray. Prevent back scattering causing fog on film. The lead screen can emit electron radiated by X-ray and γ-ray,therefore is helpful to exposure of film. 3.曝光过程中，与X射线胶片紧密接触的铅增感屏可提高底片黑度，其原因是（ ） 铅增感屏会发生荧光和可见光，从而加快胶片感光 铅屏可吸收散射线 防止背散射造成胶片灰雾 铅屏受X和γ射线照相会发射电子，从而有助于胶片感光。 4.The aim of putting filter on the window of X-ray tube is ( ) generate secondary ray to strengthen X-ray beam filtering short wavelength X-ray to get ofter X-ray filtering softer X-ray to get purer X-ray make the intensity of X-ray beam easily adjusted 4.在X光管窗口放置滤光片目的是（ ） 产生二次射线以增强X射线束 滤掉短波长X射线以获得较软的射线 滤掉软X射线以获得能量比较单纯的X射线束 使X射线束的强度容易调整 5.Based on SE-1815 ,which performance requirements should be considered for selection of the film system used for industrial radiography? A.Gmin B.δDmax C.(G/δD)min D.all of the above 5.按SE-1815，选择工业射线照相胶片系统时应考虑哪些特性要求？ A.Gmin B.δDmax C.(G/δD)min D.以上均是 6.The thick