Design and Analysis of a Bent Antennacoil for a HF RFID Transponder.pdfVIP

Proceedings of the 38th European Microwave Conference Design and Analysis of a Bent Antenna-coil for a HF RFID Transponder #1 # # *# Florian Ohnimus* , Ivan Ndip , Stephan Guttowski , Herbert Reichl #Fraunhofer-Institut für Zuverlässigkeit und Mikrointegration (IZM) Gustav-Meyer-Allee 25,13355, Berlin, Germany 1florian.ohnimus@izm.fraunhofer.de * Technische Universität Berlin Straße des 17. Juni 135, 10623 Berlin, Germany Abstract— In this work, the design of a bent antenna-coil for a Therefore, in this work, the design of a bent coil for a 13.56 13.56 MHz RFID transponder is presented. The tag is integrated MHz RFID transponder is presented, which is integrated into into a plastic ballpoint pen, optimally making use of the marginal a plastic ballpoint pen, optimally making use of the marginal volume inside the cylindrical geometry of the casing. The coil is volume inside the cylindrical geometry of the casing. Quasi- designed with a 50 % higher inductance in its planar state, so static and full-wave methods for the electromagnetic that the required inductance of nearly 6 µH to ensure resonance is obtained when the bent tag is inside the pen. Quasi-static and simulation