《Improved parameter selection method for mesoscopic numerical simulation test of direct tensile failure of rock and concrete》.pdfVIP

J. Cent. South Univ. Technol. (2010) 17: 1079−1086 DOI: 10.1007/s11771−010−0600−7 Improved parameter selection method for mesoscopic numerical simulation test of direct tensile failure of rock and concrete LIU Zhi-guang(刘智光), CHEN Jian-yun(陈健云), BAI Wei-feng( 白卫峰), XU Qiang(徐强) State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China © Central South University Press and Springer-Verlag Berlin Heidelberg 2010 Abstract: In order to numerically simulate the failure process of rock and concrete under uniaxial tension, an improved method of selecting the mechanical properties of materials was presented for the random mechanic parameter model based on the mesoscopic damage mechanics. The product of strength and elastic modulus of mesoscale representative volume element was considered to be one of the mechanical property parameters of materials and assumed to conform to specified probability distributions to reflect the heterogeneity of mechanical property in materials. With the improved property parameter selection method, a numerical program was developed and the simulation of the failure process of the rock and concrete specimens under static tensile loading condition was carried out. The failure process and complete stress−strain curves of a class of rock and concrete in stable fracture propagation manner under uniaxial tension were obtained. The simulated macroscopic mechanical behavior was compared with the available laboratory experimental observation, and a reasonable agreement was obtained. Verification shows that the improved parameter selection method is suitable for mesoscopic numerical simulation in the failure process of rock and concrete. Key words: rock; concrete; stable fracture propagation; product of strength a