亚麻籽胶为壁材制备亚麻油微胶囊.pdfVIP

802013,VoL34,No．04 食品科学 ※工艺技术 亚麻籽胶为壁材制备亚麻油微胶囊 陈元涛，郭智军，张炜，蔡林森，刘霞，池亚玲，徐江波，肖 江 (青海师范大学化学系，青海师范大学互助青稞研究与开发中心，青海西宁810008) 摘要：选用亚麻籽胶为壁材，采用喷雾干燥法，对亚麻油进行微胶囊化。以微胶囊化效率和含油率为考察指标， 考察制备亚麻油微胶囊的影响因素。结果表明：最佳喷雾干燥工艺条件：进风温度170。C，出风温度70。C，雾化器 微胶囊化效率为95．32％，含油率59．48％。 关键字：亚麻籽胶；亚麻油；喷雾干燥 ofHaxseedOil FlaxseedGumasWallMaterial Preparation MicrocapsulesUsing CHENYuan—tao，GUO Wei，CAILin-sen，LIUXia，CHI Zhi-jun，ZHANG Ya-ling，XUJiang·bo，XIAOJiang Centre of Normal Researchand of (Department University，HuzhuDevelopmentHighlandBarleyGreen， Chemistry，Qinghai Normal Qinghai University，Xining810008，China) Abstract：Flaxseedoilwas methodflaxseedaswall microencapsulatedbyspraydrying using gum material．Orthogonal was to the conditionsbasedon and arraydesignemployedoptimizemicroencapsulation microencapsulationefficiency r／minand50．41mL／ flaxseedoilcontent．The conditionswerefoundtobe170℃，70℃，24000 optimumspraydrying and minforinletair air of atomizer centrifugal feedingrate，respectively． temperature，outlettemperature，rotationspeed The wall／corematerialratioforflaxseedoil was these 2：3(m／m)．Underconditions，a optimum microencapsules of95．32％andaflaxseedoilcontentof59．48％wereobtained． microencapsulationefficiency