《《Red Hat-Linux-v5.x-iSCSI-Configuration-v1.06》.pdf

Red Hat Linux™ v5.x Software iSCSI Initiator Configuration, MPIO and tuning Guide Abstract This document covers installing and configuring the RedHat Enterprise Linux v5.x software iSCSI initiator. It also covers configuring MPIO with RHEL v5.2 or greater V1.06 Copyright © 2009 Dell EqualLogic, Inc. Oct 2009 EqualLogic is a registered trademark of Dell, Inc. All trademarks and registered trademarks mentioned herein are the property of their respective owners. Possession, use, or copying of the documentation or the software described in this publication is authorized only under the license agreement specified herein. Dell, Inc. will not be held liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change. Your performance can vary. Dell, Inc. 300 Innovative Way Suite 301 Nashua, NH 03063 Tel: 603.579.9762 Fax: 603.579.6910 Support: 877.887.7337 Revision Information The following table describes the release history of this document. Technical Report Revision Date Change 1.0 11/2007 Initial Release 1.01 11/2007 Updated path locations 1.02 10/2008 Clarified minimum release version 1.03 11/2008 Changed how to create interface files and warning about SElinux 1.04 07/2009 Updated configuring interfaces files with RH 5.3+ 1.05 9/2009 Text clean up 1.06 10/2009 Corrected blacklist and install methodology Added performance tuning section