一种间接拉伸强度仪研制和应用.pdf

万方数据 Subject : Development and utilization of an indirect tensile strength tester Specialty : Geological Engineering Name : Gao Lei (Signature) Instructor : Li Xiao-jun (Signatrue) ABSTRACT In order to consider heterogeneity of geomaterials, a new test device of determining tensile strength, which can be cooperated with industrial computed tomography, is presented. To overcome the defect that previous research results can not complete high strength indirect tensile strength test at low temperature, a quadrihedron rod is used to take the place of circular cone rod. Friction coefficient of the test device is confirmed Through the experimental test and finite element analysis. And the friction coefficient is used to carry out corresponding numerical calculation. The indirect tensile test of remolded soil is carried out, which is used by two different seam wide load module. The test results are contrasted with Brazilian test, double punch test, and ring hydraulic test. The experimental study of asphalt concrete tensile strength and asphalt concrete cracking rule at low temperature is carried out, which is used by the test device. The non-uniform sample model of asphalt glue particle materials is created, and the virtual test simulations is developed for it. The influence factor of micro mechanics behavior in asphalt glue particle materials is analyzed. Using the results of the numerical calculation, the indirect tensile strength computational formula for geomaterials of different slit width load module is obtained. The relative test of remolded soil is carried out, The tensile strength com