《3W 升压LED电源pam2803》.pdf

PAM2803 3W High Power White LED Driver Features General Description LED Power Efficiency: up to 90% The PAM2803 is a set-up DC-DC converter that Current Accuracy:±5%(VIN=3.6V to 1.8V delivers a regulated output current. The device @V =3.7V) switches at a 1.0MHz constant frequency, F Low Start-Up Voltage: 0.9V(ILED =270mA) allowing for the use of small value external Low Hold Voltage:0.75V(ILED =200mA) inductor and ceramic capacitors. 1MHz Switching Frequency Uses small, Low Profile External Components The PAM2803 is targeted to be used for driving Low RDS(ON) : 100mΩ (TYP.) loads up to 1A from a two-cell alkaline battery. The Open LED Protection LED current can be programmed by the external Over Temperature Protection current sense resistor, Rs, connected between the Low Profile SOT-23-6 Package feedback pin (FB) and ground. A low 95mV Pb-Free Package feedback voltage reduces the power loss in the Rs for better efficiency. With its internal 2A, 100 mΩ Applications NMOS switch, the device can provide high efficiency even at heavy load. During the