《lenze_Information_for_operator_9300_Servo_controller_15-30kW_v2-1_EN》.pdf

EDKVS93−02 .Bi ä i Information for the operator of the machine B . Ä 9300 15 ... 30 kW EVS9327−xx ... EVS9329−xx Servo controller 9300std079 Key for overview Position Description Controller Fixing bracket for standard mounting EMC shield sheet with fixing screws for shielded control cables Cover with fixing screws EMC shield sheet for the motor cable and the feed cable for the motor temperature monitoring with PTC ther- mistor or thermal contact (NC contact) Connections and interfaces Position Description L1, L2, L3, PE Mains connection +UG, −UG DC supply U, V, W, PE Motor connection T1, T2 Connection of PTC thermistor or thermal contact (NC contact) of the motor X1 AIF interface (automation interface) Slot for communication module (e. g. XT EMZ9371BC keypad) X3 Jumper for setting analog input signal at X6/1, X6/2 X4 System bus (CAN) connection X5 Connection of digital inputs and outputs X6 Connection of analog inputs and outputs X7 Connection of resolver and KTY temperature sensor of the motor X8 Connection of incremental encoder with TTL level or SinCos encoder and KTY temperature sensor of the motor X9 Connection of digital frequency input signal X10 Connection of digital frequency output signal X11 Connection of KSR relay output for safe standstill (for variants V004 and V104 only) Status displays Position LED red LED green Operating status Off