《PRO FACE 触摸屏 PC传送工具 操作手册英文高清版》.pdfVIP

工控编程吧 PC Transfer Tool Operation Manual Digital Electronics Corporation 工控编程吧 PREFACE Thank you for purchasing “PC Transfer Tool”. PC Transfer Tool allows you to perform maintenance operations easily, (uploading to or downloading from GP), even when the Screen creation software “GP-PRO/ PB III for Windows” is not installed to the PC on the production site. To ensure the safe and correct use of this product, be sure to read all related materials carefully and keep them nearby so that you can refer to them whenever required. NOTICE 1. The copyrights to all programs and manuals included in the PC Transfer Tool (hereinafter referred to as “this product”) are reserved by Digital Electronics Corporation. 2. The contents of this manual have been thoroughly inspected. However, if you should find any errors or omissions in this manual, contact your local sales representative. 3. Regardless of the above clause, Digital Electronics Corporation shall not be held responsible for any damages, third-party claims or losses resulting from the use of this product. 4. Differences may exist between the descriptions found in this manual and the actual functioning of this software. Therefore, the latest information on this software is provided in the form of data files (ReadMe.txt files, etc.) and/or separate documents. Refer to these sources as well as this manual prior to use. 5. Even though the information contained