《4x8 Utility Trailer-Instructions》.pdf

4’x8’ Utility Trailer JoeBlack_us Construction Instructions Page 1 4 x 8 Utility Trailer Construction Instructions This trailer is designed specifically as a heavy-duty, utility trailer with a low profile bed and options for versatility. The design incorporates strength in the main frame rather than requiring sides – even short sides – to give adequate strength. This trailer is designed tough for long, faithful service – though it may be a little heavier than some. This approach allows the trailer to be used in numerous ways for maximum utility and versatility. Your success with the trailer is dependent on the care given in construction – including materials used, construction techniques and assembly methods. If you build it well, it will perform well. Load capacity is dependent on the axle, tires, options and proper load application. The specified capacity does not include capabilities of purchased parts like the hitch, chain, axle, tires, etc.. Do not exceed manufacturer limits. As a reminder, these plans are for individual use only. Any use of these plans for resale or for producing products for sale is prohibited. Licensing for production and/or resale is available on request. Intellectual property rights for all materials are reserved. We thank you again for honoring these terms. We truly hope you will enjoy your trailer, and to help ensure that, we have included a section of Towing Tips at the end. Please use caution and proper safety equipment while building and using the trailer. Components Required: − Axle Assembly: Axle with spring centers at 48”. Several variations are available. The axle you choose should fit your particular application and the vehicle you will be towing it with. The following items must