《NI USB-6008》.pdf

USER GUIDE AND SPECIFICATIONS NI USB-6008/6009 Bus-Powered Multifunction DAQ USB Device Français Deutsch /manuals This user guide describes how to use the National Instruments USB-6008 and National Instruments USB-6009 data acquisition (DAQ) devices and lists specifications. The NI USB-6008/6009 provides connection to eight single-ended analog input (AI) channels, two analog output (AO) channels, 12 digital input/output (DIO) channels, and a 32-bit counter with a full-speed USB interface. Table 1 compares the devices. Table 1. NI USB-6008 and NI USB-6009 Comparison Feature NI USB-6008 NI USB-6009 AI resolution 12 bits differential, 14 bits differential, 11 bits single-ended 13 bits single-ended Maximum AI sample rate, 10 kS/s 48 kS/s single channel* Maximum AI sample rate, 10 kS/s 48 kS/s multiple channels (aggregate)* DIO configuration Open collector† Each channel individually programmable as open collector or active drive† * System-dependent. † This document uses NI-DAQmx naming conventions. Open-drain is called open collector and push-pull is called active drive. Figure 1 shows key functional components of the NI USB-6008/6009. Ex