《ul1598c最新说明书（安装用的）20161206》.pdfVIP

  SHENZHEN SYHDEE MANUFACTORY CO ..LTD Product Installation Instruction LED Tube Lamp Retrofit Kits 1 General Description LED Tube Light adopts the new type LED as the light source, using the standard T8 tube’s end caps, makes it easy to install and replace the traditional fluorescent lamp. The models is T8 LED Tube Lamp; the rating is 120Vac, 60 Hz, 10 W for Model SYH-M08-006, SYH-T08-006, the whole length is 0.6m; 20W for Model SYH-M08-012, SYH-T08-012, the whole length is 1.2m; 21W for Model SYH-M08-015,SYH-T08-015, the whole length is 1.5m; each above model consists of LED Tube Lamp (1 pcs), installation instruction (1 pcs), relamping label(1 pcs), cautionary label (2 pcs), 36W for Model SYH-M08-024, SYH-T08-024, the whole length is 2.4m; consists of LED Tube Lamp (1 pcs), installation instruction (1 pcs), relamping label(1 pcs), cautionary label (2 pcs), metal buckles (3 pcs), mounting screws (3 pcs). - A non-user replaceable light source and is known as a self-ballasted LED Tube Lamp. -An electronic LED Driver was built inside the unit. -For use in dry location only. - Has been evaluated for use with ceiling fixtures and not suitable for use in totally enclosed recessed fixture. -Not for use with light dimmers. -These lamps should be installed by an electrician. - These lamps work on line voltage and require all ballasts and starters to be removed before the bulb is to be installed in the fixture. -Use in 25+/- 5 degrees C environmental conditions. - Do not install in a raceway or a luminaire marked for through branch wiring. - These devices are not intended for use with emergency exits. - Always connect ground lead to fixture where applicable. - Models SYH-T(M)08-006, SYH-T(M)08-012, SYH-T(M)08-015, SYH-T(M)08-024 are intended to retrofit maximum 4 lamps, Type IC