《weblogic与tuxedo配置详解》.doc

一、WTC配置步骤： 1. Tuxedo的配置 2.1.1. 设置环境变量: rem (c) 2003 BEA Systems, Inc. All Rights Reserved. rem Copyright (c) 2000 BEA Systems, Inc. rem All Rights Reserved rem THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF rem BEA Systems, Inc. rem The copyright notice above does not evidence any rem actual or intended publication of such source code. rem Copyright (c) 2000 BEA Systems, Inc. rem All rights reserved rem ident @(#) apps/simpapp/setenv.cmd $Revision: 1.5 $ set TUXDIR=c:\bea\tuxedo8.1 set WSNADDR=\\1:8888 set APPDIR=c:\tuxedo_test\simpapp set PATH=%TUXDIR%\bin;%APPDIR%;%PATH% set TUXCONFIG=%APPDIR%\tuxconfig set BDMCONFIG=%APPDIR%\bdmconfig 2.1.3. 配置ubbconfig # (c) 2003 BEA Systems, Inc. All Rights Reserved. #ident @(#) samples/atmi/simpapp/ubbsimple $Revision: 1.5 $ #Skeleton UBBCONFIG file for the TUXEDO Simple Application. #Replace the bracketed items with the appropriate values. *RESOURCES IPCKEY 123456 #Example: #IPCKEY 123456 DOMAINID simpapp MASTER simple MAXACCESSERS 50 MAXSERVERS 50 MAXSERVICES 50 MODEL SHM LDBAL N *MACHINES DEFAULT: APPDIR=c:\tuxedo_test\simpapp TUXCONFIG=c:\tuxedo_test\simpapp\tuxconfig TUXDIR=c:\bea\tuxedo8.1 #Example: # APPDIR=/home/me/simpapp # TUXCONFIG=/home/me/simpapp/tuxconfig # TUXDIR=/usr/tuxedo VM44 LMID=simple MAXWSCLIENTS=5 #指定的最大客户端连接数 #Example: #beatux LMID=simple *GROUPS GROUP1 LMID=simple GRPNO=1 OPENINFO=NONE JSLGRP LMID=simple GRPNO = 2 JREPGRP LMID=simple GRPNO = 3 GROUP4 LMID=simple GRPNO=4 OPENINFO=NONE *SERVERS DEFAULT: CLOPT=-A simpserv SRVGRP=GROUP1 SRVID=1 WSL SRVGRP=GROUP1 SRVID=5 CLOPT=-A -t -- -n //1:8888 -m 2 -M 5 -x 10 #WSL发布地址 JREPSVR SRVGRP=JREPGRP SRVID=10 CLOPT=-A -- -W -P C:\bea\tuxedo8.1\udataobj\jolt\repository\jrepository JSL SRVGRP=JSLGRP SRVID=15 CLOPT=-A -- -n //1:7777 -M 5 -x 10 -m 2 DMADM SRVGRP=GROUP4 SRVID=20 GWADM SRVGRP=GROUP4 SRVID=30 GWTDOMAIN SRVGRP=GROUP4 SRVID=40 *SERVICES TOUPPER 红色为jolt服务需要的配置