《Signal_and_system_test_paper_2016_A》.docVIP

Signal and system test paper A For Electrical Engineering Department 2002 (Academic year 2004-2005 First Team) Study No:__________ Name:___________ PART 1 CHOOSING THE BEST ANSWER (30%) The following signals are shown below, the ______is non-periodic signal. x(t)=sin2t x[n]=cos(Π/3)n+sin(Π/4)n x[n]=cos(1/4)n Suppose that a linear time-invariant (LTI)system x(t)=cos4t and responds with an output of y(t)=0.5cos(4t-Π/6).Then,the response to the input x(t)=4cos4t+2cos(4(t-2)) is_______ . 4cos(4t-Π/6)+2cos(4(t-2)- Π/6) x(t)=0.5cos(4t-Π/6) +2cos(4(t-2)- Π/6) 2cos(4t-Π/6)+cos(4(t-2)- Π/6) The frequency response function of the LTI system is given by │H(ω)│=1 for 1≤│ω│≤5, │H(ω)│=0 for all other |ω|. The output response y(t) resulting from the input x(t)given by X(t)=5+3cos(3t-п/6)-2sin(5t)-12cos(12t-∏/4).y(t) is_______. A. 5+3cos(3t-п/6)-2sin(5t)-12cos(12t-∏/4) B. 3cos(3t-п/6)-2sin(5t) C. 3cos(3t-п/6) A stable linear time-invariant (LTI)continuous-time system, the unit impulse response is h(t)=(2e-t+e-2t)u(t). Then the H(s) of the system have ______ poles. p1=0, p2=-1, p3=-2 p1=0, p2=-1 p1=-1, p2=-2 A feedback connection system shown in following figure,the system transfer function H(s) is ________. X(s) + Y(s) + H(s) H(s)=H1(s)/[1 - H1(s)H2(s)] H(s)=H1(s)/[1 + H1(s)H2(s)] H(s)=H1(s)/H1(s)H2(s) The input/output relationship of the continuous-time LTI system is y’’(t) + y’(t) - 2y(t) = x(t).The system transfer function H(s) is ______. 2/ s2+s+1 1/(s-2)(s+1) 1/ s2+s-2. Suppose that x(t) is given by x(t)={t t1≤t﹤t2 and 1 t≥t2}. The signal x(t) can be expressed _______. x(t)=t[u(t-t1)- u(t-t2)]+ [u(t-t1)- u(t-t2)] x(t)=t[u(t-t1)- u(t-t2)]+ u(t-t2) x(t)=(t + 1)[u(t-t1)- u(t-t2)] The discrete-time system hes the relationship with the input and the output .y[n]= nx[n].To determined the system are _______. A. linear,causal,time varying , memoryless B. nonlinear,causal,time varyi