《rotary actuator-VRS-VRA_Parker》.pdfVIP

aerospace climate control electromechanical filtration fluid gas handling hydraulics pneumatics process control sealing shielding Rotary Actuators Series VRS / VRA Sizes 32, 40, 50, 63, 80, 100 125mm O O O Rotation 96 , 186 and 366 Catalogue PDE2655TCUK May 2011 PDE2655TCUK Rotary Actuators - Series VRS / VRA • Transforms the rectilinear motion of 2 single acting opposite cylinders into rotary motion via a rack and pinion drive contained within the cylinder body. • Various tasks can be handled by use of a torque cylinder, including gate opening and closing, clamping and agitation of fluids and raw materials. • Key points of the VRS / VRA cylinder design lightweight materials (aluminium alloy) accuracy in motion (cushioning, clearance compensation - bores up to 80mm) long life (floating piston, nitrile seals, adjustable cushions) good resistance to corrosion easy cleaning (extruded body) • Operates with dry, lubricated or non lubricated air • The range includes bores from Ø32 to 125mm with rotative angles of 96, 186 and 366O • Magnetic piston versions can be fitted with P8S sensors and brackets • Several options are available; rotative angle adjustable stop, male shaft or female shaft (through) WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and re