《SST-PB3-VME_Setup_Procedure》.pdfVIP

Controller Procedures EP-SSTPB-IO-002 SST-PB3-VME-x ProfiBus Card Configuration Revision Notes: • Initially written by Peter D. Britcliffe for Arcelor Mittal in 2008. • Edited by Rich Ward for TMGE in 2008, to remove customer specific notes and add instructions for configuring the 2 channel cards and special instructions for cards with older versions of runtime. Introduction This document outlines the procedures used to configure the SST-PB3-VME-1 and SST-PB3- VME-2 ProfiBu