《德国E+H压力传感器 Cerabar S PMC71-PMP71-PMP75》.pdf

Technical Information Cerabar S PMC71, PMP71, PMP75 Process pressure measurement Pressure transmitter with ceramic and metal sensors Overload-resistant and function-monitored; Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus Application Your benefits The Cerabar S pressure transmitter is used for the • Very good reproducibility and long-term stability following measuring tasks: • High reference accuracy: up to ±0.075%, • Absolute pressure and gauge pressure in gases, steams as PLATINUM version: ±0.05% or liquids in all areas of process engineering and • Turn down 100:1, higher on request process measurement technology • Used for process pressure monitoring up to SIL3, • Level, volume or mass measurement in liquids certified according to IEC 61508 by TÜV SÜD • High process temperature • HistoROM®/M-DAT memory module – without diaphragm seals up to 150°C (302°F) • Function-monitored from the measuring cell to the – with typical diaphragm seals up to 400°C (752°F) electronics • High pressure up to 700 bar • Continuous modularity for differential pressure, • International usage thanks to a wide range of approvals hydrostatic and pressure (Deltabar S – Deltapilot S – Cerabar S), e.g. – replaceable display – universal electronic • Quick commissioning thanks to quick setup menu • Easy and safe menu-guided operation on-site,