基于RFID应用的IC卡设计2毕业设计.docVIP

《信息识别技术》期末考试 题 目 基于FRED技术的ID卡应用 学 名 田亚婷 专业班级 电子信息1102 学 号 541101030234 院 （系） 电气信息工程学院 完成时间 2014-05-15 Abstract In recent years, automatic identification technology developed rapidly, especially with the rapid development of electronic technology and manufacturing technology continues to progress, using radio and radar technology to achieve rapid development of RFID technology in logistics, commerce and trade, access control security, identification technical and medical fields of application are extremely broad support and applications.  Introduction This section describes the development and current status of IC cards, the first chapter describes the design of this major work and tasks. Defined the mission, the second chapter introduces the IC card system, that is, IC card and card reader works, then the design choices and arguments, decided to use AT89C2051 MCU as a system controller rather than the FPGA, and then describe of this non-contact IC card and the design of IC cards are given the hardware chart. In the third chapter introduces the hardware of the system followed by the design, that is, the production of the antenna, rectifier circuits, voltage regulator circuits, microprocessor circuits, switch circuits. This chapter describes the design of software components, first of all use this design to the basic knowledge of SCM made a detailed introduction, which includes timing control register (TCON), work register (TMOD), interrupted to allow control register (IE), serial communication serial port registers and control registers, and then expounds on the IC card microcomputer programming ideas and, finally, this design m