科学计算Tensile Strength of Welds(焊接抗拉强度).pdfVIP

Tensile Strength of Welds(焊接抗拉强度) 数据摘要： This is a highly fractionated two-level factorial design employed as a screening design in an off-line welding experiment performed by the National Railway Corporation of Japan. There were 16 runs and 9 experimental factors. The response variable is the observed tensile strength of the weld, one of several quality characteristics measured. All other variables are at plus and minus levels. 中文关键词： 分形设计, 田口设计,两级设计,抗拉强度,焊缝, 英文关键词： fractional design,Taguchi design,two-level design,tensile strength,weld, 数据格式： TEXT 数据用途： The data can be used for engineering design. 数据详细介绍： Tensile Strength of Welds Keywords: fractional design, Taguchi design, two-level design, dispersion effects. Description This is a highly fractionated two-level factorial design employed as a screening design in an off-line welding experiment performed by the National Railway Corporation of Japan. There were 16 runs and 9 experimental factors. The response variable is the observed tensile strength of the weld, one of several quality characteristics measured. All other variables are at plus and minus levels. Variable Description Rods Kind of welding rods Drying Period of drying Material Welded material Thickness Thickness Angle Angle Opening Opening Current Current Method Welding method Preheating Preheating Strength Tensile strength of the weld in kg/mm Source Taguchi, G., and Wu, Y. (1980). Introduction to Off-Line Quality Control . Central Japan Quality Control Association, Nagoya, Japan. Box, G. E. P., and Meyer, R. D. (1986). Dispersion effects from fractional designs. Technometrics 28, 19-27. Carroll, R. J., and Ruppert, D. (1988). Transformations and Weighting in Regression.Chapman and Hall, N