泡沫混凝土压缩特性及抗压强度模型周顺鄂.pdfVIP

32 11 武 汉 理 工 大 学 学 报 Vol. 32 No. 11 2010 6 JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY Jun. 2010 DOI: 10. 3963/ j. issn. 20 10. 11. 003 周顺鄂, 卢忠远, 焦 雷, 李三霞 ( , , 62 10 10) : 制备了一系列的泡沫混凝土, 对泡沫混凝土的压缩力学性能进行了测试, 研究了泡沫混凝土压缩应力应变曲 线的特征, 析了影响泡沫混凝土压缩性能的相关因素, 并运用 GibsonAshb 模型对抗压强度进行了模拟, 通过拟合得 出了抗压强度与相对密度的方程, 确定了表征孔棱材料 数和孔壁断裂强度的微观结构参数研究表明, 泡沫混凝土压 缩过程 为4 个阶段, 即平台阶段密实阶段屈服阶段和衰退阶段, 其压缩力学性能受到基体材料容重和气孔形态及 布等因素的影响; GibbsonAshb 模型拟合的结果具有较高的合理性, 对 析泡沫混凝土微观结构力学性能有较大的 帮助 : 泡沫混凝土; 压缩特性; GibbsonA shb 模型 : T U 55 : A : 2010) Compression Property and Compression Stren th Model of Foamed Concrete ZH O U Sh une, L U Zhongy uan, JIA O L ei, LI Sanx ia ( School of Materials Science and Engineering, Southwest Universit of Science and T echnolog , Ke Laborator for Advanced Building Materials of Sichuan Province, Mian ang 62 10 10, China) Abstract: A series of foamed concrete were prepared in this paper. Compression mechanical propert of foamed concrete was tested. T hen, we have done research on stressstrain curve characteristics of foamed concrete, and anal zed relative factors ef fect on compression propert of foamed concrete. Compression strength values were simulated b GibbsonAshb model. The e quation of compression strength and relative densit was deduced out b fitting compression strength. Microstructure parameters characterizing the proportion of pore rib and pore wall fracture strength was determined. The results show that there are four steps in foamed concrete compression process, namel plateau step, compacting step, ield step and decline step. T he compres sion mech