玻璃润滑剂对TA15钛合金与K403镍基高温合金界面接触热阻的影响.pdfVIP

33 7 机 械 工 程 材 料 V ol . 33 N o. 7 2009 7 M at erials or M echanical Eng ineering Jul . 2009 TA15K403 , , ( 大连理工大学三束材料改性国家重点试验室, 大连 116024) : 为了给钛合金的模锻工艺制定提 理论依据, 利用稳态法在自制的接触热阻测量装置 上研究了玻璃润滑剂对T A 15 钛合金与模具用 K403 镍基高温合金界面接触热阻的影响结果表 明: 在T A 15 和K40 3 合金接触面间加入玻璃润滑剂可显著增大两者间的接触热阻; 当界面平均温 度不超过636 , 玻璃润滑剂厚度在0 . 06~ 0. 96 m m 范围内时, T A 15 与K403 合金界面接触热阻 与玻璃润滑剂厚度大致呈线性关系; T A 15 与K403 合金的界面接触热阻随着温度的升高及压力的 增大而减小 : 钛合金; 接触热阻; 导热系数; 玻璃润滑剂 : T G14 6. 2 : A : 2009) 0700 1204 Effect of Glass Lubrication on Thermal Contact Resistance between TA15 Titanium Alloy and K403 i Base Alloy ZHA G Xingzhi, ZHA G Liwen, XI G Lei ( State K ey L abo rato ry o M ater ials M o di icatio n by Elect ron , I on and L aser Beam , D alian U niver sity o T echno log y, Dalian 116024, China) Abstract: In or der to pro vide theo retica l basis o r the o rg ing pro cess o T i allo y, an experimental study or ex amining ther mal contact r esist ance ( R t ) o T A 15 ( T i allo y ) / glass lubricatio n/ K 40 3 ( N i base alloy ) jo int w as car ried out by using steady heat low met ho d w ith a set o sel dev eloped thermal co ntact r esistance ex perimental sy stem . T he results sho w that glass lubrication had a g reat adiabat ic character istic. R t w as linear w ith the thickness o g lass lubricatio n w hen the thickness o g lass lubr icatio n changed r om 0 . 06 to 0. 96 mm and t he temper atur e o the j oint w as below 636 . R t o T A 15/ g lass lubr icatio n/ K403 decreased w ith increasing pressur e and temperature. Key words: T i alloy; thermal co nt act resistance; ther mal conductivi