基于LPC1754条形码打印设计毕业论文讹.docVIP

基于LPC1754的条形码打印设计 摘 要 随着科学技术的快速发展，条形码技术是信息数据自动识别、输入的重要方法和手段，现已广泛应用到医疗、商业、工业等使用标签更多的行业。本文介绍了一种基于32位单片机LPC1754的条形码打印机的组成，详细的阐述了整个硬件工作流程以及各个功能模块的硬件设计。该系统包括步进电机驱动模块、热敏打印头过热保护模块、热敏打印头缺纸检测模块、RS-232通信模块以及供电等功能模块。其中步进电机驱动模块主要控制打印头走纸及切纸，热敏打印头的过热保护采用的是热敏电阻保护方式，此外采用光电传感器完成缺纸检测功能，采用RS232通信串口完成打印机与上位机之间的通信。供电模块给控制电路及热敏打印头供电。本次设计结构较为简单可以很好的实现条形码打印控制功能，经反复测试，可以很好的的实现条形码打印。 关键字 LPC1754单片机 步进电机传感器RS-232热敏打印头 A Bar Code Printing Based LPC1754 ABSTRACT With the rapid development of science and technology, bar code automatic identification technology information data, enter the important methods and means, it has been widely applied to the medical, commercial, industrial and other use of labels more industries. This paper describes a composition of 32-bit microcontrollers based on the LPC1754 of bar code printers, detail the hardware design of the entire hardware workflow, and each module. The system includes a stepper motor drive modules, thermal print head overheat protection module, the thermal print head is out of paper detection module, RS-232 communication module and power supply and other functional modules. Wherein the stepper motor driver module controls the print head and take the paper cutter, thermal protection thermal printing head is used thermistor protection, in addition to the use of photoelectric sensors complete paper out detection, the use of RS232 serial port for printer and PC communication communication between machines. Power supply module to the control circuit and power the thermal print head. The design of the structure is relatively simple and can achieve a good bar code print control function, after repeated tests, can be very good implementation of bar code printing. Keywords: LPC1754 microcontroller stepper motor sensors RS-232 thermal print head 目 录 中文摘要 1 英文摘要 错误!未定义书签。 1 绪论 1 1.1 课题研究背景以及需求 1 1.2 课题研究的内容和目标 2 1.3 研究的意义与价值 2 2 系统设计原理及方案概述 3 2.1 系统方案概述 3 2.1.1 需求分析 4 2.2 控制系统总体设计 4 2.2.1 控制系统的总体设计 4 3 系统硬件设计 6 3.1 电源电路 6 3.1.1 5V电源电路 6