基于大功率白光LED的可见光双路通信系统设计方案毕业设计柒.docxVIP

.  PAGE \* MERGEFORMAT 27  PAGE \* MERGEFORMAT V 毕业设计 摘 要 提出一种基于大功率白光LED的可见光双路通信系统设计方案，详细给出了该设计方案可见光发射端与接收端A、B两路系统设计的原理与组成。发射端A路传输语音信号，B路传输高频信号。发射端A路采用基带传输，发射端B路采用调制传输，同时通过白光LED发送；接收端A路通过带通滤波器电路、放大电路，B路通过高通滤波器电路、解调电路、放大电路，分别将信号传递给喇叭，从而分别还原出A、B路信号，如此实现了可见光双路通信。测试结果表明该系统具有通信距离远、可靠性高及稳定性好等优点。 关键词：白光LED，可见光通信，调制解调 Abstract A visible light communication system with two channels is proposed in this paper. The principle and composition of the system is described in detail. The system is divided into two parts, namely transmitting and receiving subsystems. High power white LED is used as the transmission medium, with the function of signal transmission. The voice signal can be transmitted from the transmission subsystem in two channels, correspondingly received at the receiving subsystem with two channels. It can realize communication requirement and experimental results of the proposed system performs better with further communication range, more robust and stable compared with other similar single channel communication methods. Keywords: White LED, Visible light communication system, Modulation and demodulation 目 录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc426018764 前 言  PAGEREF _Toc426018764 \h 1  HYPERLINK \l _Toc426018765 1 绪论  PAGEREF _Toc426018765 \h 1  HYPERLINK \l _Toc426018766 1.1 课题研究的背景及意义  PAGEREF _Toc426018766 \h 1  HYPERLINK \l _Toc426018767 1.2 白光LED通信系统性能的相关技术  PAGEREF _Toc426018767 \h 2  HYPERLINK \l _Toc426018768 1.2.1 阵列光源的布局设计  PAGEREF _Toc426018768 \h 2  HYPERLINK \l _Toc426018769 1.2.2 驱动电路优化设计  PAGEREF _Toc426018769 \h 3  HYPERLINK \l _Toc426018770 1.2.3 均衡技术  PAGEREF _Toc426018770 \h 4  HYPERLINK \l _Toc426018771 1.2.4 正交频分复用技术  PAGEREF _Toc426018771 \h 4  HYPERLINK \l _Toc426018772 1.2.5 信道编码技术  PAGEREF _Toc426018772 \h 4  HYPERLINK \l _Toc426018773 1.2.6 分集接收技术  PAGEREF _Toc426018773 \h 5  HYPERLINK \l _Toc426018774 1.2.7 自适应传输技术  PAGEREF _Toc426018774 \h 6  HYPERLINK