PLC电厂输煤系统毕业论文.doc

Wuhan Polytechnic University Industrial Commercial College 本科毕业论文（设计） 论文题目 ： PLC电厂输煤系统 作者声明 本毕业论文（设计）是在导师的指导下由本人独立撰写完成的，没有剽窃、抄袭、造假等违反道德、学术规范和其他侵权行为。对本论文的研究做出重要贡献的个人和集体，均已在文中以明确方式标明。因本毕业论文（设计）引起的法律结果完全由本人承担。 毕业论文（设计）成果所有。 特此声明。 作者专业 ： 作者学号 ： 0 作者签名 ： 年 月 日 PLC电厂输煤系统 XXX The PLC control of coal handling system in power plant X, XX 2012年 日摘要 Abstract Coal handling system is a major component of the thermal power plant electricity generation system.It typically includes these process of a pile of coal, coal unloading, conveying belt, pulverized coal, iron removal and so on.The traditional control of coal handling system mainly uses the relays,contactors to control.It has many defecs such as it has a complex mechanism so it is not easy to change,and its anti-interference is bad.With the development of thermal power plant,the traditional control can not meet the requirements.But these problems hasbe well solved by the emergence of PLC. This paper mainly discusses the coal handling belt control. Because of the coal handling system includes many processes,So should take it divided into several segments.The key request for the belt is how to get the belt from the posterior to the anterior boot sequence, and then used to sequence stop.Using PLCcan solve this process easily.We will simply write the program according to the requirement,then import it intothe PLC. We only need to slightly modify theprogram when the whole system arise problems,instead of traditional control must change the whole line.In the process, PLC also has a good robustness and accuracy. Key words:Coal handling system;Belt control;PLC;Siemens S7-20目录 1 1 课题的来源与意义 1 1.1 课题的来源 1 1.2 课题研究的目的及意义 2 1.3 课题研究现状 2 2 电厂输煤系统 4 2.1 输煤系统介绍 4 2.2 输煤皮带控制介绍 4 2.3 输煤控制流程图 5 3 输煤控制硬件部分 7 3.1 PLC介绍 7 3.2 PLC工作原理 9 3.3 PLC选型 11 3.4输煤控制选择的PLC主要技术数据与模块功能 12 3.5 传感器 14 4 皮带传送系统的PLC控制程序 16 4.1皮带传送控制要求 16 4.2控制系统梯形图和接线图 16 5 控制过程模拟 23 主要参考文献 25 后 记 26 引 论 近些年来，我国电力工业发展迅速，各种类型的火电厂的大量建设以及新设备、新技术和新工艺